Plastic bulging of sheet metals at high strain rates

The biaxial bulge test is a material test for sheet metals to evaluate formability and determine the flow stress diagram. Due to the biaxial state of stress induced in this test, the maximum achievable strain before fracture is much larger than in the uniaxial tensile test. A new dynamic bulge testing technique is simulated and analyzed in this study which can be performed on a conventional split Hopkinson pressure bar (SHPB) system to evaluate the strain-rate dependent strength of material at high impact velocities. Polyurethane rubber as pressure carrying medium is used to bulge the OFHC copper sheet. The use of hyperelastic rubber instead of fluid as a pressure medium makes the bulge test simple and easy to perform. The input bar of SHPB is used to apply and measure the bulging pressure. The finite element simulation using ABAQUS/explicit and analytical analysis are compared and show good correlation with each other. The results clearly show that as the strain-rate increases, the strength of the OFHC copper increases. From the study, a robust method to determine the material behavior under dynamically biaxial deformation conditions has been developed.